AMD Ryzen Vs Intel

Hello,

I know that servers with EPYC CPUs are very reliable, but are Ryzen servers reliable enough? I've seen there're many Ryzen servers on sale on Hetzner. If I rent a Ryzen server, do I need to reboot it every some days? Thanks a lot.

Hi

I'm looking for an AMD Ryzen server these days. My requirement is stated below.

AMD Ryzen 5 3600 Hexa-Core
64 GB DDR4
2x 512 GB NVMe SSD
40TB Bandwidth

I got a good price from Europe. It was 40.00 . But I'm looking for a server from USA / Canada. Anyone can match this price in US ?

Hello There,

I want to buy around 10 of AMD Ryzen 3600 server.

I would like to get the below config -

AMD Ryzen 5 3600
16 / 32 GB RAM
256 / 512 GB NVMe
10 TB Bandwidth @ 1 Gbps any US location is fine ... Monthly billing cycle, monthly contract and no setup fees please.

I'm a reseller and already working with quite a few providers in the US. I'll be moving these servers from WebNX.

Thanks.

Hello,

I am currently looking for the best deals I can get for 2 Windows Dedicated Servers. My preferred configuration is a single 5950X per location but will consider multiple lower end servers if the price is right. Normally the 5950X option will work out the best due to only a single Windows license required. Chicago is my preferred location but if the price is a lot better, I might consider Dallas and Kansas.

Locations
1x Chicago USA (preferred) or Kansas City USA or Dallas USA
1x UK or Germany or France

Configurations Options
1x AMD Ryzen 5950X with 128GB RAM, 1TB SSD (preferred)
2x AMD Ryzen 5900X with 64GB Ram, 512GB SSD
2x AMD Ryzen 3950X with 64GB Ram, 512GB SSD
2x AMD Ryzen 3900X with 64GB Ram, 512GB SSD
2x AMD Ryzen 5800X with 64GB Ram, 512GB SSD

Suggestions are welcome.

Hi,
I need a dedicated server for hosting a single php-mysql site with heavy traffic.
My DC has these two options among others. Which should I choose?

SERVER1:
CPU: AMD Ryzen 5 3600 Hexa-Core "Matisse" (Zen2)
RAM: 64 GB DDR4
HDs: 2 x 512 GB NVMe SSD

SERVER2:
CPU: Intel Xeon E3-1275V6
RAM: 64 GB DDR4 ECC
HDs: 2x 480 GB DC SSD

Cost is almost the same for both servers.

I'm from Europe and looking at most offers in the north America, they all seem to have pretty limiting bandwidth or outrageous costs compared to European providers.

For the price of a Hetzner Ryzen 5 3600 box, best I could find with higher bandwidth limits (>100TB) was so long ago that I forgot from whom the offer even was, but I remember it was an i3... an i3 in a server for the same cost as the Ryzen 5 in EU.
I'm aware how different the marker and costs are compared to these two regions, but there must be some providers that offer more bandwidth for the price, right?

Is anyone able to point me to something that I can trust to be reliable meanwhile now blowing my wallet out into space.
At this point I'm looking for anything with appropriate specs (Ryzen 5 or newer Xeons), ~64GB RAM, >100TB transfer, 512-1TB SSD, optionally maybe an option for more IPs for not a lot of money? (>2$ per IP is too much for me)
My max budget would be ~50$-65$, that's what I'm aiming for.

Thanks in advance!

Hi there,

So it's my first post and if I am posting in wrong section please move it.

Basically I am looking for ryzen 9 3900x server with 64 gb ram and 256gb ssd minimum.
Bandwidth if unlimited would be better.

If someone know any reliable and budget providers then please let me know.


Thanks,

Hello, good afternoon. Look, I'm going to be honest, I know that it is not easy, nor is it cheap, but I am willing to learn to be able to create my server.
My idea is to make a server, that people can rent to play minecraft, that is, to create their server. My idea is that through an ftp they can connect to a desktop or something like that and can run their server. I have a pc that I buy to sell, but I couldn't sell it, so I want to use it for this. I know that there are pcs to make a server, but my idea is not to become a super hosting provider for minecraft. I want to go little by little. The pc I have has a ryzen 5 1600af, an asrock a320m-hdv 4.0 motherboard, a 2gb rx 550, a 500w redragon 80 plus bronze power supply, a 240gb pny solid disk, 8gb of ram and a kolink cabinet.
I know I'm going to have to make improvements, but I don't know how. What I know is that I'm going to need a lot of ram, because the minmecraft servers take up a lot. My idea is to put 32gb or 64gb to start with some clients. Also the storage if I will have to enlarge. Tell me if I'm wrong. Then around the source and the processor, I do not know if what it has is fine. So I ask them if the ryzen 5 1600 is going to work.
Well, having said all this, if any component that I have does not work, please tell me. And if I have to change one, tell me. For now my problem is the hardware, since around the software I will investigate a lot about linux and operating systems, to see which is the best and good more things. The software for now is not my doubt

Hi all,

Sorry if I posted this in the wrong forum; had trouble deciding whether to put it here or in the VPS forum.

I am running to some trouble with trying to properly expose a particular CPU topology to a VPS on a CentOS 8 server running KVM and Virtualizor, and was hoping you might be able to help. Not sure if I am doing something wrong and/or not understanding something.

I have an AMD Ryzen 5600X dedicated server with 6 cores and 12 threads. I created a VPS to which I am trying to assign 8 VCPUs (4 cores with 2 threads per core for a total of 8 threads). In Virtualizor, I set CPU units to 1000, CPU cores to 8, and CPU percent to 800. I then select the CPU topology option and specify 1 for sockets, 4 for cores and 2 for threads. CPU mode is host-passthrough. However, when using the lscpu command within the VPS or when checking /proc/cpuinfo, the topology shows up as 1 socket, 8 cores and only 1 thread per core. Does anyone know why this is? Would this affect performance within the VPS at all (that is, are applications not able to take advantage of hyperthreading, or does it even matter that the topology shows up this way)? The topology shows up as expected on an Intel E-2136 server that I tested on, so not sure what the difference is here.

Thanks for any tips you can provide!

I'm investing in the system to run the automated tool in the browser, I'm wondering the following problems, hope you can help me.
The servers I'll be running Promox on create multiple Windows 2012 VMs.

Should I buy XEON E* series servers or Xeon Sliver, Xeon Gold, Or AMD Ryzen.. ? I am targeting server rental units like Hetzner, Workldstream.

The purpose of each Promox server is to create many VMs, so when buying a server I need to pay attention to core theard ?

The intel and AMD lines have different number of cores and theards which confuses me
Each VM I will create is 1 socket, 2 cores, 5G ram.

Should I buy low CPU lines to have more cores instead of buying a powerful server with only a few dozen cores for example?
Looking forward to just replying. So that I can optimize costs and improve performance.


Here is the %CPU image I will be running, currently I am on a Hetzner server. Please advise, With the tool % cpu and ram I am running like this, which server should I invest in to be able to create the most VMs to optimize costs.
Image: https://i.imgur.com/z8in1cj.png

Thank you