Dedicated Server and Plesk + Litespeed

Is it really that great? Is it necessary?

On a dedicated server with cpanel/whm and 50-200 different websites hosted on it. (standard business sites - no gaming, radio, streaming etc)

Why should we add Litespeed?

Not sure if this is the right category.. I want to know what makes a server speedy. My issue is, I tried about 6 servers the last 6 months.

Reseller Hostmantis (5$ a month)
VPS cloudcone 10 core 16 GB ram (50$) a month + cpanel (15$) + litespeed (30$) a month
VPS from a dutch guy, 8 core, 16GB ram, directadmin (70 a month)
Cloudcone VPS: 10 cores, 60GB ram, Cpanel + litespeed = like 70 a month).
Wpprovider (claims to have to fastest dutch hosting): 25,- a month.
Neostrada magento hosting (6 core, 8GB ram, cpanel = 20,- a month)

Believe it or not, but the freaking 5$ per month SHARED (!!!!) RESELLER (!!!!!) is the fastest of them all. And I really don't understand how that is possible. Is there anybody who can explain to me what makes a server fast? First I thought it was litespeed, so i bought a litespeed license for by VPS'ses. Then I thought it was the lack of RAM, so i went to Contabo with 60 freaking GB of ram WITH litespeed. And even that is slower if I 1:1 compare it with a 100% duplicated site on that Hostmantis reseller package...

Then a guy from Asia who tried to improve the pagespeed for a webshop copied the site to his dedicated server and the results were INSANELY fast. I asked him his config and he said:

2 X Intel(R) Xeon(R) CPU E5-2650
32 Cores
64 GB ram
2 X SSD Drive

He said he didn't had Litespeed, only Memcache installed.

Is there anybody who can tell me what makes a server fast? Is it the RAM? the CPU? The managing? The location? The LITEspeed/Memcached/Redis? And when does it make sense to get a Dedicated server instead of a VPS?

About me: As side job I build websites. Most of them very easy, 3 page wordpress sites with no visitors. I host about 60. They don't really care about speed, cause they are happy if there are There are some bigger clients (3 with a woocommerce webshop, 1 with a magento webshop) for which speed IS important.

What I would like is
THE FASTEST Server possible for my amount
At least 500GB SSD storage
Managed
Backups remotely (and something like JEtbackup)
Softacalous
Cpanel + WHM (100 accounts)
Budget: Under like 180$ for all (if that is anyway possible).

Hello,
im looking for a new Dedicated Server with Plesk. I was at cPanel 4 last years and i'm moving again to Plesk...

Server specs:
AMD Ryzen 7 3700X
64 GB DDR4 ECC
2 x 1 TB NVMe SSD

Do you have any optimization tips ?

Hi,

litespeed's licenses have different Workers,
and kinsta's packages (https://kinsta.com/plans/?plan=visit...interval=month) have "PHP workers per site",
what are their difference ?

I'm hosting an online forum on this server:

Intel® Core i9-9900K (8 core) 128gb RAM NVMe SSD 2x1TB


running Ubuntu. I'm using Plesk for webserver configuration. My online forum is completely developed by me in PHP and JS. The site is using web-sockets for logged in users for chatting etc. I'm running the default configuration of Plesk for the most part with Nginx handling static files and otherwise forwarding the request to Apache. As explained by Plesk here.

I use the default nginx config with 1 worker_process and 1024 worker_connections. On PHP-FPM I use pm = static, max_requests = 2000 and max_children = 500. I have more than enough RAM left running the forum and also the CPU stays below 40% workload all the time.

Now the problem: Visiting the site on any browser works just fine. But then out of 20-30 ajax requests one just takes waaaay too long. Like every ajax request gets an instant answer and from time to time one takes >10 seconds, a few forever. And I have no clue why. I looked through nginx and website error logs and cannot find any answer to this problem.

I would be very happy about any possible hint. I know it's hard to guess based on the little information. But maybe someone here experienced something similiar?

Dimitar H.
Customer support said they are proving a dedicated server with AMD EPYC 7501 Processors and We will get only 2 cores But AMD EPYC 7501 Processors 32 cores
https://www..com/dedicated-servers-pricing
He sends a screenshot https://prnt.sc/vagv78

If anyone using their dedicated server please help me find help me about this issue

Hi there,

I'm currently struggling with creating a VPS on a Dedicated server.

I've purchased quite a high spec Dedicated server which is running Windows 2019 with Hyper-V installed and I'm looking at installing Ubuntu 16.04 and running it as a VPS off of the Dedicated server so I can allow my friends to make use of the server. I've purchased a failover IP address and I've attached it to the main Dedicated server but I'm a bit confused on how I am suppose to tell Hyper-V to use the additional IP only in that one VM box.

Please feel free to burn me for my stupidity but I could really do with some advice - thank you in advance.

Kind regards,
Jack R

Hi friends,

Doy you have any method or article for we know monthly traffic and simultaneous traffic that will accept a server?.

This is the server's data:

-CPU: Intel Xeon E5-1650v4 - 6c/12t - 3.6 GHz/4 GHz
-RAM: 64 GB ECC 2133 MHz
-Disk: 2450 GB SSD NVMe
-OS: CloudLinux 7
-Web Server: LiteSpeed

I will host 1 cPanel account with 1 WordPress (nothing more) and I need know if can accept 10.000 - 15.000 simultaneous users.

Thank you very much. Have a nice day.

I am currently looking for a new dedicated server provider my current server has the following


CPUIntel Xeon E5-1650V3 PLUS NIC 1 Gbit
- Intel I210

HDD1x HDD SATA 4,0 TB Enterprise

HDD2x SSD SATA 480 GB Datacenter ( would be fine if the 2 sata drives were changed to 1 ssd drive of 2 tb's)

RAM 8x RAM 32768 MB DDR4 ECC reg. 256 gb total

Taken from the Directadmin on my current server
Total Memory 263859820 kB
Free Memory 1908640 kB
Total Swap Memory 4194300 kB
Free Swap Memory 3246332 kB
System Uptime 277 Days, 6 Hours and 36 Minutes
Apache 2.4.41 Running
DirectAdmin 1.59.5 Running
Exim 4.92 Running
MariaDB 10.2.29 Running
Named 9.11.4 Running
sshd Running
dovecot 2.3.6 (7eab80676) Running
pure-ftpd 1.0.49 Running
Php 7.3.12 Installed
Php 5.6.40 Installed (php2)


Used
Disk Space (mb) 277671
Bandwidth (gb) 930.2369
Domains 60
Users 29
Resellers 0



IPv4 Network Subnet /27 (29 usable IPs)

IPv6 Network Enabled

Root Access to the server

Cloudflare CDN

HTTPS for websites

Fully Managed & Secured

Automated 24/7 Monitoring

I am currently using Direct Admin I am willing to change to Cpanel/Plesk o whatever control panel <<they>> use as long as <<they>> can move over my sites mostly WordPress without them having any problems to integrate into <<their>> hosting panel of choice

I recently got a server (AX41-NVMe) with Plesk at Hetzner. Via the DNS console I added the base domain name, where I also want to reach the server, and that works fine.

What I'm running into now is Hetzner telling me to manually add all domain names to the DNS console in order to use them with the server. But that's crazy, isn't it? There are hosting companies that also rent the servers and they cannot manually add every domain name in the DNS console, I think.

I'm not used to it that way either. The server I rent from Leaseweb allows me to simply add a domain name to cPanel and it will be automatically recognized by the worldwide DNS servers.

For me the Hetzner DNS console is not a workable solution in this way. So I thought to solve it with the Plesk extension for Digital Ocean. Works great! But unfortunately no more than 50 domain names are allowed to be added to their DNS. I want to add 100 domains, so this solution doesn't work either.

So my question to you is:

How can I make my domain names reachable, without manually adding them all to Hetzner's DNS console?